Description

Send Inquiry

An EDI system for water purification is a high-purity treatment setup that combines Reverse Osmosis (RO) with Electrodeionization (EDI) to continuously produce ultra-low conductivity water-without using regeneration chemicals like acid or caustic.
It's widely used where stable, very pure water is needed (pharma, biotech, power plants, electronics, cosmetics, labs).

How a EDI System For Water Purification works (simple view)

Raw Water

→ Pretreatment (sand filter, carbon filter, softener/antiscalant)

→ Double Pass Reverse Osmosis (RO)

→ EDI Module

→ Pure Water Tank + circulation loop

→ Point of use

What each step does:

Pretreatment – removes dirt, chlorine, hardness (protects membranes)
RO – removes 95–99% of dissolved salts
EDI – removes remaining ions electrically for ultra-pure water

Water Quality You Typically Get

W Parameter	After RO + EDI
Conductivity	~0.05–0.2 µS/cm
Resistivity	~5–18 MΩ·cm
Hardness	~Zero
Silica	Very low
TDS	Nearly zero

(Actual numbers depend on raw water and system design.)

Why Industries Prefer Edi Over Traditional Dm Plants

Advantages

No acid/caustic regeneration
Continuous operation (no downtime)
Very stable purity
Less wastewater
Safer & cleaner operation

Needs

Good RO pretreatment
Chlorine-free feed water
Proper monitoring

Common applications

✔ Pharmaceutical purified water
✔ Biotech & fermentation
✔ Boiler feed in power plants
✔ Semiconductor & electronics
✔ Cosmetics & food manufacturing
✔ Laboratories

Quick rule of thumb

• RO only → good quality water
• RO + EDI → ultra-pure, stable, professional-grade water

If you'd like, tell me:

• Your industry
• Required flow (LPH or m³/hr)
• Raw water TDS (if known)

I can suggest the exact EDI System For Water Purification you need (single pass, double pass, degasser, tank size, etc.).